Safety Rig is America's #1 Source for oilfield safety products, including whipchecks and whipsocks, pipe clamps and hose hobbles, fall arrest systems and more. For more information on the safety products we carry, email us at sales@safetyrig.com.

We have several different shipping options available from which you can choose, based on your needs. We can even ship using your own freight forwarder.

WHIPCHECKS

Use whipchecks to help prevent injuries or accidents resulting from hose or coupling failure. A whipcheck extends across the hose fittings to give standby safety for hose. Simply pull back the spring and slip the loops on the whipcheck over each hose before connection to provide security against hose whip.

Whipchecks are designed with a 5 to 1 safety margin at 200 psi. At 300 psi that margin drops to 3 to 1. Any pressure above that is not a suitable application for whipchecks and may result in injury or death in the event of an explosive coupling decompression.

We recommend whipchecks be used only on AIR HOSES carrying no more than 200 PSI. Any other use is at your own risk.
If your hose application is hydraulic OR exceeds 200 psi, we strongly recommend that you use our high pressure safety whip checks specifically designed to prevent hose whip on high-pressure hose applications. For more information on hydraulic whip checks and high-pressure hose safety restraints click here

Hose-To-Hose Whipchecks (Type W)

Whipcheck designed specifically to secure a hose-to-hose connection. made in USA carbon steel and stainless steel models availible for high pressure and low pressure hoses.

Cable	Hose I.D.	Length	Max WP psi	Part Number
1/8"	1/2" - 1-1/4"	20-1/4"	200	WB1
3/16"	1/2" - 2"	28"	200	WB3
1/4"	1-1/2" - 3"	38-1/4"	200	WA2
3/8"	4"	44"	200	WA4

Hose-To-Tool Whipchecks (Type WSR)

Whipcheck designed specifically to secure a hose-to-tool connection. Steel hose whips

Cable	Hose I.D.	Length	Max WP psi	Part Number
1/8"	1/2" - 1-1/4"	20-1/4"	200	WSR1
3/16"	1/2" - 2"	28"	200	WSR3
1/4"	1-1/2" - 3"	38"	200	WSR2
3/8"	4"	44"	200	WSR4

Bronze/Copper Ferrule Whipchecks

WA2 made with bronze/copper ferrules for special environmental conditions.

Cable size: 1/4", Part #: WA2B

304 SS Cable Whipchecks

WB1 made with 304 stainless steel cable and springs with bronze/copper ferrules for special environmental conditions.

Cable size: 1/8", Part #: WB1SS

Bolt-On Whipchecks

WSR1 made with stainless steel safety marine eye used to connect safety cable to a bolt on tool.

Cable size: 1/8", Part #: WSR1E

Hose-To-Hose Lanyard Whipchecks

WB1 made with safety clips and lanyards used to lock Air King, A type, Surelock Couplings.

Cable size: 1/8", Part #: WB1C

Hose-To-Tool Lanyard Whipchecks

WSR1 made with safety clips and lanyards used to lock Air King, A type, Surelock Couplings.

Cable size: 1/8", Part #: WSR1C

� Accepted by: OSHA, MSHA, U.S. Army Corps. of Engineering, Bureau of Mines, Bureau of Reclamation
� Whipchecks use strong steel cables to help prevent hose whip.
� Whipcheck is the low cost answer to eliminate injuries caused by broken air hose connections
� Hose-to-hose or hose-to-rigid outlet
� No tools needed - Easy to install and remove
� Highly resistant to rust and corrosion
� Upon request, whipchecks are also available with bronze/copper ferrules.
� Also available with 304 stainless steel cable and springs with bronze/copper ferrules.

INSTALLATION !!!


Incorrect Install Whipchecks should NOT be installed with slack in the safety cable.	Correct Install Whipchecks should be installed in the FULLY EXTENDED position.

HYDRAULIC / HIGH-PRESSURE HOSE SAFETY

Hose whipchecks and safety accessories specifically designed for use with hydraulic OR other high-pressure hose applications exceeding 200 PSI.

	High-Pressure Whipchecks/ click here for info Whip checks limit the hose from whipping in the event of a connection failure. Whip checks are made of durable nylon strapping with extra heavy stitching.

	Containment Grips Containment grips limit the possibility of serious injury to personnel in the event of a connection failure. Containment grips are available in stainless steel or galvanize plated carbon steel

	Support Grips Support grips assist in holding the weight of the hose as it hangs in vertical or slanted positions. Support grips are made of high grade, coated, galvanized wire. Also called WHIP STOPS

	Bend Restrictors Bend restrictors, which are available for most hoses, assist in reducing the stress near the end fitting as well as prevent kinking of the hose. Bend restrictors are made of PVC material.

	Spring Guards Spring guards, which are available for most hoses, reduce stress near the hose end fitting and prevent kinking of the hose. In addition, they can be custom fit to the length of the hose. Spring guards are made of high tensile spring steel with a rust resistant coating.

	Burst Guards Burst guards protect the operator and surrounding equipment from hose failure. Burst guards are made of synthetic rubber with wire steel reinforcement.

	Abrasion Covers Abrasion covers help protect the hose from excessive wear due to use on rough surfaces. Abrasion covers are made of clear vinyl and reinforced with a rigid PVC helix coil. In colors like red and yellow and black, roll lengths availible.